Data collection terminal MERTECH Seuic AutoID Q9 series 8 (3/32Gb) (Android 10, 8 Core, 3Gb/32Gb, X3-2D, Wi-Fi, 4G) (Item 9051)

The MERTECH Seuic AutoID Q9 series 8 data collection terminal is designed to automate the operations of a store, warehouse, restaurant, delivery service, or to solve other tasks. The DCT is compatible with software from the companies "Kleverens" and "DataMobile." The use of the DCT reduces downtime and increases efficiency.

Each MERTECH Seuic AutoID Q9 series 8 DCT comes with pre-installed software with a free three-month trial period: Warehouse 15 and Store 15 from the company Kleveren. After the trial period, the current license can be renewed or upgraded.

Model Advantages

The DCT is equipped with a 2D scanner for barcode recognition. The minimum image contrast for reading is 10%. The DCT operates on the principle of a photo scanner: the camera captures the barcodes, and the software decodes them. The 13-megapixel camera with autofocus and flash ensures high image clarity.

The advantages of the new model include:

• Recognition of all types of barcodes.
• Support for labeling and EGAIS operations.
• "Hot swap battery" feature.
• 27-key illuminated keyboard.
• Device protection rating: IP67.
• Operating temperature: -20°C to +50°C.
• Operating system: Android 10.0.

After removing the battery, the terminal will remain powered on. During this time, a fully charged battery should be installed to replace the depleted one. The "hot swap battery" feature allows uninterrupted operation during charging and prevents data loss during battery replacement.

The charged terminal can be used as a POWER BANK to recharge other devices. If not used, a fully charged battery will last for 14 hours of operation. The charging time from an outlet is 3.5 hours.

The data collection terminal features a customizable virtual scan button that can be placed anywhere on the touchscreen, providing maximum convenience in executing commands.

Technical Specifications

The DCT has an ergonomic and reliable body. The outer panels are made of plastic and polycarbonate. A rugged industrial-type touchscreen and a button keyboard are used for input. The diagonal of the touchscreen is 4 inches. The panel is protected by Corning Gorilla Glass.

The customer can choose from available memory options:

1. RAM: 3-4 GB.
2. Built-in memory: 32-64 GB.
3. Ability to install a 32 GB Micro SD Card.

For wireless connections, Bluetooth or BLE 5.0, Wi-Fi, GPS, Beidou, GLONASS can be used. There is a USB port on the casing for wired connections and battery charging.

You can order the MERTECH Seuic AutoID Q9 series 8 terminals directly from the manufacturer. Only when ordered through the MERTECH dealer network, the lowest prices on equipment apply. DCT delivery is available throughout all regions of Kazakhstan. Leave a request on the website to order data collection terminals.